Charging Controller
Charging Controller

The Charging Controller for HV Battery Modules supports CCS and CHAdeMO as option. The communication is provided via CAN and Automotive Ethernet interfaces. It also includes High Voltage Measurement and Isolation Resistance Monitoring.

  • 400 V
    Architecture
  • 12 - 24 V
  • 0.32 kg
    Mass
CCS Standard
The Controller supports most common charging protocols and compatible with most of EVSE in the EU. Also support USA charging station specifics. CHAdeMO standard available as an option. Charge your device worldwide.
Safe Contactors Control
High-voltage measurement possibility both before and after Charge Contactors allow better and safe control over charge procedure.
Specs
Technical Details
  • Architecture
    • 400 V
  • Operating Voltage (min)
    • 8 V
  • Operating Voltage
    • 12 - 24 V
  • Operating Voltage (max)
    • 32 V
  • Sleep-mode Current
    • 1.5 mA
  • Operating Power Consumption( without external loads)
    • 3.2 W
  • Supported standards
    • CCS, CHAdeMO (HW Option)
Interfaces
  • Input Interfaces
    • 2x Analog inputs for PT1000, 2x Digital inputs with wake-up possibility, 1x HVIL slave, 2x HV measurement channels, 1x Isolation monitoring channels, 1x ELOCK position input, 2x Relay aux. inputs CP, PP, PE
  • Output Interfaces
    • 2x PWM outputs (12/24 V, 4 A), 1x H-Bridge (12/24 V, 2 A, PWM), 3x High-side LED outputs, 1x 5 V output (0.1 A), 1x HVIL master
  • Isolation Monitoring
    • SIM 100 Chip Onboard
Operating Conditions
  • Storage Temperature
    • -40°C to +85°C
  • Operating Temperature
    • -40°C to +70°C
  • IP Rating
    • IP40
Mechanical Specification
  • Mass
    • 0.32 kg
  • Dimensions
    • 200 × 100 × 30 mm