Traction Inverter 400V 105kW
Traction Inverter 400V 105kW, developed to provide precise control for Elements motor family, and deliver stable performance in any environmental conditions. Several Inverters can be installed to a single vehicle platform to combine any required performance by using Torque Vectoring, or Software Differential Lock Feature.
- 400 VArchitecture
- 12 kgMass
- 300 - 430 VVoltage
- 122.5 kWPeak Power
High Control Precision
Compliance with the REG85 standard ensures high accuracy in maintaining torque at the rated power point, regardless of external conditions and powertrain temperature. Possibility to additionally control thrust via inverter software.
Torque Vectoring
New dimension of precise traction control. Programmable Torque Vectoring and Limited Slip Differential Software functions are available in case of installing paralleled inverters for single axle of a vehicle
Torque Vectoring
New dimension of precise traction control. Programmable Torque Vectoring and Limited Slip Differential Software functions are available in case of installing paralleled inverters for single axle of a vehicle
Specs
Technical Details
- Architecture
- 400 V
- Voltage
- 300 - 430 V
- Maximum DC Current
- 300 ADC
- Maximum DC Power (continuous)
- 105 kW
- Maximum DC Power (peak)
- 122.5 kW
- Efficiency
- 97%
- DC Bus Capacitance
- 470 uF
- AC Phase Current Maximum (continuous)
- 300 Arms
- AC Phase Current Maximum (peak)
- 350 Arms
- Low Voltage Supply (range)
- 10 - 32 V
- Low Voltage Supply (maximum current)
- 1 A
- HV Power Capacitor Passive Discharge Time from 430 V to below 30 V (safe voltage)
- 10 min
- Low Voltage Supply (nominal)
- 24 V
Interfaces
- HV Interface
- Amphenol PowerLok
- LV connector
- Amphenol Circular RT
- RTD Inputs PT100
- 1x
- Digital Inputs
- 2x
- Digital Outputs
- 2x
- Resolver Interface
- 1x
- CAN 2.0 (256 kbps - 1 Mbps)
- 2x
- RS232 Programming Port
- 1x
Operating Conditions
- Operating Temperature Range
- -40°C to +85 °C
- Environmental Protection Class
- IP67 / IP6K9K
Mechanical Specification
- Dimensions
- 325 x 280 x 80 mm
- Mass
- 12 kg
- Volume
- 6.8 L
Other Details
- Enclosure Material
- Aluminium
- Coolant Flow Rate
- 6 - 10 L/Min
- Max. Temperature of Coolant
- 65°C
- Coolant Type
- 50/50 mix ethylene glycol (antifreeze) / water or propylene glycol / water with Aluminum corrosion inhibitor additive
